With registration, RTOs must juggle many responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, where validation often causes the most anxiety.
Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.
Validation involves checking which aspects of an RTO's assessment process are accurate and identifying areas for improvement. With a solid understanding of its components, validation is less intimidating.
As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.
The standards mandate two types of validation.
The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
This implies that we validate both prior to and following the assessment. The focus of this article is on the first type: assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
An Introduction to Assessment Validation
As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
We will dedicate this article to assessment tool validation.
Procedure for Assessment Tool Validation
With a grasp of the two validation types, let’s focus on assessment tool validation.
Best Times to Conduct Assessment Tool Validation
The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Hence, whenever new learning resources are bought, assessment tool validation is necessary before student use.
There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.
Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:
- updating your resources
- your scope includes new training products
- course is reviewed against training product updates
- learning resources are identified as a risk during the risk assessment
ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.
Which Training Products to Validate?
It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.
Resources Needed to Start Assessment Tool Validation
Training Materials
To conduct assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.
Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.
Validation Panel
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
Your validation panel must, as a group, possess:
Vocational competencies and current industry skills that relate to the unit being validated
Up-to-date knowledge and skills in vocational teaching and learning
One of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the equivalent successor
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it provides documentation that you have validated your resources before students use them.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?
As detailed in our blog post Common Problems In Assessment Tools, it is crucial that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Basic Principles of Assessment
Fairness – Does the assessment process provide equal opportunity and access to everyone?
Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?
Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?
Evidence Basic Rules
Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:
Walk the Talk
Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
diapering
prepare bottles, bottle feed infants, and clean equipment
solid food prep and feeding babies
appropriately respond to infant signs and cues
prepare and settle infants for sleep
monitor and encourage suitable physical exploration and gross motor skills for the age
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.
All Requirements or Not Competent
Pay attention to lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity
Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What information might be included in a work package?
The answer can include:
Mandatory resources
Relevant costs
Activity duration
Allocated duties and responsibilities
If an assessment item requires multiple answers, specify the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
This also applies to assessment items with double-barrelled questions or those that ask for multiple answers at once. These can confuse students and assessors, as shown in the sample question below:
Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.
Answers can include, but are not limited to:
Weather conditions – isolation of work area, engineering, PPE
Work area and ground conditions – eliminating hazards, isolating, engineering controls
People – isolating, engineering controls, administration
Structural hazards – substituting, isolation, engineering controls
Chemical hazards – isolation, use of engineering controls, administrative here controls
Equipment or machinery – isolation, use of engineering controls, administrative controls
Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.
Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.